Description

PRODUCT USAGE
1. Make sure the surface you are adhering to is dry and clean. Always choose a smooth surface such as tile, glass, or sheetrock
2. Peel off the adhesive tape backing from your press 2 paste toothpaste dispenser to expose the double sided paste.
3. Place the Press 2 paste toothpaste dispense against the surface and press down firmly.

PRODUCT SPECIFICATIONS:

• Model: JUXIN-300
• Material: Plastic x Silicon
• Color: Black and white
• Toothpaste Dispenser size:14.5×7.2×6.5cm
• Weight: 180g
• Toothbrush Holder size:13×5.5×4.5cm
• Primary Material: ABS
• Surface Installation: Smooth Walls, Tiles, glass.
• Feature: Eco-friendly

Installation Steps:
– Open the toothpaste squeezing device, insert the toothpaste so that the head of the toothpaste and silica gel are closer
– Cover the toothpaste squeezing device
– Squeeze the end of the tube until a small amount of the paste overflows
– Using a toothbrush, press the button on the lower part of the feed port

NOTE:

If the toothpaste tube has a flip top, you must remove the entire cap for proper operation.

Pull the front cover of the press 2 paste toothpaste dispenser off.

Push and twist the tip of the toothpaste tube into the pump.

Gently squeeze the toothpaste tube until toothpaste dispenses from the pump.

Be sure to squeeze until toothpaste appears. Clean off any paste around the top.

Slide the press 2 paste toothpaste dispenser cover back onto the unit.